|
Xantrex Prosine 2.0 2000W, 12V, True Sine Wave Inverter/Charger 100 amp continuous duty, Multi-stage battery charger
Provides 2000 watts of true sine wave AC power from a DC source and 100-amp multistage battery charging. A powerful all-in-one solution, Prosine 2.0 inverter/chargers (part#805-2000 – hardwire version) deliver up to 2000 watts of unsurpassed clean true sine wave output power and combines this with a 100 amp, multistage battery charger. Series stackability allows for two units to power 240 VAC applications such as power tools, oven ranges, washer/dryer combinations and air conditioners. The Prosine 2.0 is ideal for upgrading your electrical system in a boat, RV, or utility vehicle, for building a standby power system for critical equipment or incorporating an alternative energy system for a remote home. The system includes a full function LCD remote control panel and battery temperature sensor.
Product Features
- · 2000-watt inverter (4500-watt surge)
- · 100 A power factor corrected multistage charger
- · True sine wave output (crystal controlled)
- · Built-in 30 A transfer switch automatically transfers between inverter power and incoming AC power
- · Series stackability for 120/240 VAC (requires two units)
- · Power sharing reduces charging current when AC loads are activated to prevent tripping of shorepower breaker
- · Equalization mode conditions batteries for longer life
- · Optional GFCI version available (part#805-2020)
- · LCD remote control panel and temperature sensor included
- · Compact, lightweight, and easy to install
- · Two year warranty
Remote Control Panel
- · Independent inverter and charger on/off controls
- · Push button control of power sharing, equalizing, battery set-up, and system configuration
- · Easy to read backlit digital text messaging display
- · Numerically displays AC and DC system information including volts, amps and state of inverter/charger
· Monitors battery temperature and adjusts charger to provide an accurate charge in any climate
Options
- GFCI version (part#805-2020)
Protection Features
- Over voltage and under voltage protection
- Over temperature and automatic overload protection
- Short circuit AC backfeed protection
Specifications
|
Electrical Specifications - Inverter
|
|
Output power continuous
|
2000 watts
|
|
Surge rating (5 sec)
|
4.5 kW
|
|
Output current
|
17 A RMS continuous, 50 A peak
|
|
Output voltage
|
117 VAC RMS
|
|
Output frequency
|
60 Hz +/- 0.05% (crystal controlled)
|
|
Output wave form
|
True sine wave <2% THD typical
|
|
Efficiency (full load)
|
87%
|
|
Peak efficiency
|
89%
|
|
No load power draw (inverting)
|
<25 W
|
|
No load power draw (search mode, 3 s interval)
|
<2 W
|
|
Input DC voltage range
|
10 - 16 VDC
|
|
Electrical Specifications - Charger
|
|
Output current
|
100 A DC continuous
|
|
Output voltage
|
12 VDC nominal
|
|
Output voltage range
|
0 - 17.5 V
|
|
Charge control
|
3 stage with manual equalize
|
|
Charge temperature compensation
|
Remote battery sensor
|
|
Efficiency (full load)
|
81% typical
|
|
AC input power factor
|
0.99
|
|
Input current (for 100 A charging)
|
15 A RMS nominal
|
|
Input AC voltage
|
120 VAC nominal
|
|
Input AC voltage range
|
90 - 135 VAC
|
|
General Specifications
|
|
Compatible battery types
|
Flooded / gel / AGM / Pb-Ca
|
|
Transfer relay rating
|
30 a, 1/5 HP, 120 VAC
|
|
Transfer time (AC to inverter and inverter to AC)
|
16 ms typical
|
|
Storage ambient temperature range
|
-40?F - 158?F (-40?C - 70?C)
|
|
Optimal operating temperature range
|
32?F - 104?F (0?C - 40?C)
|
|
Operating ambient temperature range
|
-4?F - 140?F (-20?C - 60?C derated about 40?C)
|
|
Dimensions (H x W x D)
|
17.7 x 11.2 x 5.7" (450 x 285 x 145 mm)
|
|
Weight
|
24.0 lb (11 kg)
|
|
Warranty
|
Two years
|
|
Part numbers
|
805-2000 (Hardwire)
|
|
|
805-2020 (Hardwire & GFCI)
|
|
|
808-2000 (DC wiring box)
|
|
Regulatory Approvals
|
|
CSA/NRTL certified to CSA 107.1, UL 458 (including Marine supplement) and UL 1741 standards
|
|
FCC Class B / Industry Canada Class B
|
|
KKK-A-1822D compliant, for use in "Star-of-Life" ambulances (GFCI version)
|
|
ABCY compliant, recommended practices E-8, E-9, A-20, and A-25 for marine use
|

|