Surrette Flooded Batteries
This item will take 6-8 weeks to be delivered to you
Rolls Solar Series
Surrette's "Dual Container" Construction More Power - Less Weight
- "Non breakable dual container construction"
- 10 Year Manufacturer's Warranty!
- Batteries can be easily broken down into cells for easy transportation
- Includes series connectors/cables EXCEPT for models S-530 & S-460
Supplied in a Dual Non-Breakable Container, the new design eliminates breakage due to rough handling and abuse. Repairs are simpler and less time consuming. Short circuits from water, dirt, and falling metal objects are eliminated due to a moisture tight protective outer cover.
Environmentally Friendly No Acid Leakage
The new generation of batteries utilizes dual container construction. Each cell is assembled in its own inner container made of high temperature retardant, durable polypropylene with the inner cover heat bonded to the container,(thus acid leakage is eliminated). The cells are then assembled into a high density tough polyethylene outer container with a removable lid. Even if the outer container were to break the battery would still be operable without the harmful affects of sulfuric acid spills.Optional Cell Connection
Cell replacement is now less frequent, but if necessary, Surrette makes it clean and quick. As an option the individual cells can be bolted together allowing the battery to be repaired, or assembled on location. Cell replacement can be accomplished without special skills or tools.Enveloped Positive Plates
The positive plates are doubled insulated. The first layer consists of a thick woven glass mat. The plate and matting are then sealed in a non-destructible, microporous, polyethylene envelope. The envelope eliminates the possibility of separator misalignment, cracked separators, treeing, or shorting at the bottom or sides. The sediment chamber is eliminated allowing more liquid space above the top of the cell, thus lengthening periods between watering.Rugged Plate Construction
The Rezistox Plate Design uses fewer, but heavier, members in the grid (current carrying conductor). More metal where it counts. The heavier members offer more resistance to positive grid peroxidization (corrosion), and allow for greater percentage of power producing active material. (The grid and active material are referred to as the plate.)
Our Series 4000 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 12 years of life!
Our Series 5000 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 20 years of life thanks in part to their "Non-Breakable", dual container (modular) construction.
Rolls Battery, based in Salem, MA, has been manufacturing deep cycle batteries for more than 40 years. Our Series 4000 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 12 years of life!
- Use of thickest plate, highest density active material in plate construction.
- Many of our batteries are constructed with structural foam containers.
- Enveloped Separators
- Increased Liquid Reserve
- Unsurpassed cycling service, 10 year average life expectancy.
- Less weight
- Greater rigidity
- Greater durability
- Ability to remove sediment chamber, eliminating separator mis-alignment, treeing, and shorting
- Allows for higher plates to be used in the same sized cell, thus yielding greater capacity
- Less maintenance